0% Intro APR for 15 months on purchases and b… Citi Strata℠ Card Calculators How we make money
VOATLAS
How to Buy a Truck Bed Storage System Without Stress

How to · Auto

How to Buy a Truck Bed Storage System Without Stress

Get your custom-fit pull-out drawers installed without wrecking your cash flow using a smart payment window.

VoAtlas editorial Updated · 3 min read
Typical cost $1,650 before anything else
Across the 0% window $91.67/mo 18 months, no interest

How we got that: $1,650 spread evenly across the 18-month introductory window on the Citi Simplicity® Credit Card. Checked · at the bank Carry a balance past the window and the standard APR applies to what is left.

A custom pull-out drawer system turns a messy truck bed into a clean, locked vault of gear where nothing slides around or gets lost. They aren't cheap to run, but they save you hours of digging for tools and keep your gear safe from the weather. The best time to buy is during holiday weekend clearance sales straight from the manufacturer, when prices tend to soften up.

Keep negotiations separate from how you plan to pay, as a card window is best used for the deposit and extras rather than carrying the whole purchase. Let's look at how to time the sale, lock down the fit, and spread out the cost sensibly.

Just remember that the intro window is a strict deadline rather than free money, and any leftover balance at the end will get hit with standard interest.

The steps

  1. 01

    Watch for holiday clearance

    Skip buying during peak contractor season and wait for direct-from-manufacturer clearance sales over holiday weekends. You can usually shave a good chunk off that typical $1650 price tag if you just stay patient and watch their site.

  2. 02

    Verify your bed specs

    Measure your truck bed twice and check the tailgate clearance with the specific drawer unit you want. Custom-fit systems don't leave room for guessing, and returns on heavy steel and plastic gear are a massive headache.

  3. 03

    Map your monthly math

    If you are splitting the cost, remember that $1650 spread across the intro window comes out to $91.67 per month. Make sure that specific number fits your monthly budget before you pull the trigger on the order.

  4. 04

    Use your card window

    You can use the Citi Simplicity® Credit Card to cover the system, which gives you 0% for 18 months on purchases and balance transfers from date of account opening. That gives you plenty of breathing room to pay for the setup without rushing.

  5. 05

    Line up local help

    These drawer systems are heavy and awkward to lift into a truck bed by yourself. Line up a friend to help with the install on a Saturday afternoon so you don't scratch your paint or throw your back out.

  6. 06

    Check the card terms before you commit

    Every figure we publish for the Citi Simplicity® Credit Card carries the date a person verified it against Citi and a link to where they checked. Intro windows and APRs change without notice, so confirm the current terms before applying.

    See Citi Simplicity® Credit Card terms →

Common questions

Can I install these drawers myself?

Yes, but you need at least two people and basic socket sets. Plan on spending a couple of hours getting the shims and alignment right so the drawers slide smoothly.

Do these systems stay waterproof?

Most use weather-stripping and sealed decks to keep rain out, though they are usually water-resistant rather than entirely submarine-proof. Check the manufacturer seal specs if you haul sensitive electronics.

Will the drawers affect my payload capacity?

They add a few hundred pounds of dead weight to your truck bed before you even put any gear inside. Factor that weight in if you haul heavy pallets or lots of timber.

What happens if I miss a monthly payment?

Missing a payment can trigger late fees and might cancel your promotional rate entirely. Set up auto-pay for that monthly target so you never drop the ball.